beautypg.com

27" combination installation – FRIGIDAIRE FGEW2765K User Manual

Page 5

background image

Specifications

subject to change.

FRIGIDAIRE

USA

Electrolux Major Appliances, North America

250 Bobby Jones Expressway

Martinez, GA 30907

1-800-FRIGIDAIRE

frigidaire.com

CANADA

Electrolux Canada Corporation

5855 Terry Fox Way

Mississauga, ON L5V 3E4

1-800-265-8352

frigidaire.ca

MOSS_EW 27INST FR 04/09

© 2009 Electrolux Home Products, Inc.

Printed in the U.S.A.

27" Combination Installation Specifications

Always consult local and national electric codes.

(Refer to product-specific electrical specifications on this page.)

Minimum 23-1/2" deep cutout dimension is critical for proper

combination installation, to ensure that each built-in product’s

faceplate will fit flush against cabinet front.

Bases must be level and cabinet front must be square.

Minimum 4-1/2" required distance from bottom of Wall Oven cutout

to floor, 31" suggested.

Respect critical dimensions as noted for proper installation of

built-In products.

Minimum 21" clearance needed for Wall Oven door depth when open.

27" Built-In Microwave Specifications

For built-in installation, microwave MUST be installed with optional

27" Trim Kit which includes Bottom Duct Assembly – shipped in

separate box, ordered by individual part number.

Voltage Rating – 120V / 60 Hz / 15 or 20 Amps

Connected Load (kW Rating) @ 120 Volts = 1.7 kW

(For use on adequately wired 120V, dedicated circuit having 2-wire

service with a separate ground wire. Appliance must be grounded

for safe operation.)

Amps @ 120 Volts = 14.3 Amps

Full base of solid plywood or similar material required, capable of

supporting 100 Lbs.

Minimum 2-7/8" clearance required from bottom of Built-In Microwave

cutout to top edge of Wall Oven’s faceplate, leaving a 2" visible gap

between both product faceplates.

27" Electric Single Wall Oven Specifications

Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz

AC only electrical supply with ground required on separate circuit

fused on both sides of line.

For detailed electrical requirements, refer to model-specific product

page and installation guide on web.

Full base of solid plywood or similar material required, capable of

supporting 200 Lbs.

To adapt oven to fit cutout height greater than 28-1/8", add one

2"-wide wood shim of appropriate height to each side of opening

under oven side rails. Lifting oven will hide larger cutout opening

at top and oven’s 1"-high bottom trim will hide shims at bottom.

(Standard 1"- High Bottom Trim included.)

Note: For planning purposes only. Refer to Product Installation Guide

on the web at frigidaire.com for detailed instructions.

Frigidaire 27" Combination Installation –

24" Built-In Microwave (with 27" Trim Kit)

Electric Single Wall Oven

27" Combination Installation

Built-In Microwave / Single Wall Oven