Fujitsu Siemens Computers 4612 FA - Manual (Page 27)

Color monitor 4612 FA
A26361-K628-Z100-1-5E19 English - 19
Ê Lay the monitor on its face on a soft surface.
!
The monitor surface is susceptible to scratching!
Ê Pull off the two cover plates (1) in the direction of the arrow.
Ê Remove the four screws (2) on the rear of the monitor.
You can now mount a swivel arm or a wall bracket as per VESA FPMPMI with 100 mm hole
spacing. For instructions on how to mount the swivel arm or wall bracket, please see the
documentation for the swivel arm or wall bracket.
Technical data
Dimensions and weight (LCD monitor)
Visible diagonals: 46 cm
Dot pitch: 0.28 mm
Screen size: 359 mm x 287 mm
Maximal resolution: 1280 x 1024 pixels
Dimensions (W x H x D) incl.
monitor base: 454 mm x 462 ... 562 mm x 218 mm
Weight: approx. 9 kg
Accessories: Power cable (1.8 m)
Data cable (5 ft/2 m) D-SUB to DVI-A
Data cable (5 ft/2 m) DVI-A to DVI-A
Storable display modes: 26
Electrical data
Video: analog, positive, 0.7 V
pp
, 75 Ω
digital: DVI
Synchronization: Separate Sync. TTL, positive or negative
Composite Sync. TTL, positive or negative
Sync. On Green
Horizontal frequency: 31 kHz .... 82 kHz (multi-scanning)
Refresh rate: 56 Hz .... 85 Hz
Maximum pixel rate: 135 MHz
Power supply: switches automatically
100 V - 120 V, 50 Hz - 60 Hz
±
3 Hz, 0.6 A
220 V -240 V, 50 Hz - 60 Hz
±
3 Hz, 0.3 A
Total power consumption: < 65 W (ON, Normal mode)
< 5 W in the energy-saving mode (standby mode, suspend
mode and OFF mode)