FUNAI PY90VG - Manual (Page 66)

66 EN
Changing the Setup menu
Note
• If you change the setting in the Setup menu, the information of contents stays on even when the power is switched off.
• An item which is not currently available is grayed in the Setup menus.
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
Tour of the Setup menu
Setup Items (highlight is the default) Contents
1.Language setting
Pages 67-68
Disc Menu Language English
French
Spanish
Set the language for disc menu.
Audio Language Original
English
French
Set the language for audio.
Subtitle Language OFF
English
French
Set the language for subtitle.
2.Display setting
Pages 68-69
OSD Language English
Français
Español
Set the language for OSD
(On Screen Display).
Angle Icon ON
OFF Display or undisplay multi-angle icon
if DVD in playback mode contains
multi-angle scenes.
Screen Saver OFF
5 minutes
10 minutes
Set the time to work the screen
saver on the screen.
FL Dimmer Auto
Bright
Dark Set the brightness of the front panel
display.
3.Audio setting
Pages 69-70
Digital Out PCM
48kHz
96kHz Set whether the sound recorded
in 96kHz will be down sampled in
48kHz.
Dolby Digital
PCM
Stream Set the type of sound signal which
outputs from the digital audio output
jack.
Dynamic Range
Control ON
OFF
Compressing the range of sound
volume.
4.Video setting
Page 71
Progressive Scan ON
OFF
Set to the progressive scan mode (set
to “ON”) or to the interlace scan mode
(set to “OFF”).
Still Mode Auto
Field
Frame
Set the type of still image in pausing
playback.
5.Parental setting
Pages 72-73
Parental Lock All
level 8 to 1
Set the parental level of your DVD
discs.
(Change password) Enter the current
four-digit password Set and change the password.
6.PBC setting
Page 73
PBC (Video CD only) ON
OFF
Set the Playback Control.
(Video CD only)
E9A12UD_PY90VG_p41-88.indd 66 E9A12UD_PY90VG_p41-88.indd 66 2006/04/26 18:27:26 2006/04/26 18:27:26