Franklin SCR-226 - Manual (Page 5)

✔ Adjusting the Contrast
You can make the screen lighter or darker to
suit your viewing needs. Press
or to
adjust the contrast at the Ready screen. If the
screen remains blank, you may need to
replace the batteries.
✔ Resuming Where You Left off
To save battery life, this product will automati-
cally shut off within two minutes if no key is
pressed.
Each time you turn the product on, you will
return to the last screen you viewed.
Note: This will only work if you have turned the
demonstration off.
✔ Viewing the Demonstration
Each time you turn the unit on, the Quick
Demo appears. You can stop the demo at any
time by pressing CLEAR.
If you do not wish to have the Demo run each
time you turn the product on, you can disable it
at any time. To do so, type
✽✽ d at the Ready
screen, then press ENTER. To re-enable the
demo, type
✽✽ d and press ENTER again.
4
Getting Started
manualSCR-226Rev.B.qx 7/3/03 12:00 PM Page 4