Assembly – Fisher-Price BARBIE 74350 User Manual

Page 13

• With the gas cap tether pointing down, insert and snap

the gas cap assembly into the square opening in the rear
of the vehicle.

Gas Cap
Assembly

Tether

• With the sport bar positioned to angle towards the rear of

the vehicle, fit the ends of the sport bar into the holes in
the vehicle body on either side of the seat.

• Press firmly on each side of the sport bar to fit it into the

vehicle body.

Sport Bar

Rear of

Vehicle

Seat

Hole

• Using safety scissors, separate the taillight lenses and

taillight housings from the plastic connectors. Dispose of
the plastic connectors properly.

• Fit a taillight lens in a taillight housing.

Taillight Lens

Taillight
Housing

• Face the back of the vehicle.

• Align the holes in the taillight with the holes in the

vehicle body.

• Insert two #8 x 1" screws through the holes in the taillight

and into the vehicle body.

• Tighten the screws with a Phillips screwdriver. Do not

over-tighten.

• Repeat steps 22 and 23 to assemble the other taillight

lens and taillight housing to the vehicle body.

Taillight

Rear of
Vehicle
Body

Assembly