Seating and safety restraints – FORD 2000 Ranger User Manual

Page 98

Text mode
Original mode

7. Pull the lap belt portion across
the child seat toward the buckle and
pull up on the shoulder belt while
pushing down with knee on the
child seat.

8. Allow the safety belt to retract to
remove any slack in the belt.

9. Before placing the child in the
seat, forcibly tilt the seat forward
and back to make sure the seat is
securely held in place.

10. Try to pull the belt out of the retractor to make sure the retractor is
in the automatic locking mode (you should not be able to pull more belt
out). If the retractor is not locked, unbuckle the belt and repeat steps
two through nine.

Check to make sure the child seat is properly secured before each use.

Seating and safety restraints