FORD 2000 Ranger - Manual (Page 68)

other objects on the key ring held away from the ignition key. Check to
make sure the encoded ignition key is an approved Ford encoded
ignition key.
Spare SecuriLock
௢ keys can be purchased from your dealership and
programmed to your SecuriLock
௢ passive anti-theft system. Refer to
Programming spare SecuriLock
௢ keys for more information.
If one or both of your SecuriLock
௢ keys are lost or stolen and you want
to ensure the lost or stolen key will not operate your vehicle, bring your
vehicle and all available SecuriLock
௢ keys to your dealership for
reinitialization.
Theft indicator
The theft indicator on the instrument cluster will operate as follows:
• When the ignition is OFF, the theft indicator will flash briefly every
two seconds to indicate the SecuriLock
௢ system is protecting your
vehicle.
• When the ignition is turned to RUN or START, the theft indicator will
light for three seconds and then go out. If the theft indicator stays on
for an extended period of time or flashes rapidly, have the system
serviced by your dealership or a qualified technician.
The Theft indicator is controlled by the SecuriLock
௢ system. During
the 30 second prearm state, it is normal to see the theft indicator pulse
brighter behind the constant glow.
Programming spare SecuriLock
ி
keys
Spare SecuriLock
௢ keys can be purchased from your dealership and
programmed to your SecuriLock
௢ passive anti-theft system (up to a
total of eight keys). Your dealership can program your new SecuriLock
௢
key(s) to your vehicle or you can do it yourself using the following
simple procedure. To program a new SecuriLock
௢ key yourself, you will
need two previously programmed SecuriLock
௢ keys (keys that already
operate your vehicle’s engine). If two previously programmed
SecuriLock
௢ keys are not available (one or both of your original keys
were lost or stolen), you must bring your vehicle to your dealership to
have the spare SecuriLock
௢ key(s) programmed.
Controls and features
68