FRIGIDAIRE FCFH 183 BW - Manual (Page 10)

10
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
This appliance must be earthed.
The manufacturer declines any liability should these
safety measures not be observed.
Electrical Requirements
Before switching on, make sure the electricity Supply
voltage is the same as that indicated on the appliance rating
plate.
If the European plug is unsuitable for your sockets, the plug
should be removed (cut-off in the case of a moulded-on
plug) and an appropriate plug fitted.
The wires in the mains lead are coloured in accordance with
the following code:
Green and Yellow: Earth
Blue:
Neutral
Brown: Live
The wire coloured green and yellow must be connected to
the terminal marked with the letter "E" or by the earth
symbol or coloured green and yellow.
The wire coloured blue must be connected to the terminal
"N" or coloured black.
The wire coloured brown must be connected to the terminal
marked "L" or coloured red.
Upon completion there must be no cut, or stray strands of
wire present and the cord clamp must be secure over the
outer sheath.
ELECTRICAL CONNECTION