Opening & closing your safe, Consumer affairs, Home and office security safes your combination – First Alert FIRE THEFT SAFE 2054F User Manual
Page 4: Opening safe with combination dial, Opening the first time, Closing & locking the safe, How to contact us, Ordering replacement keys
2
Opening & Closing Your Safe
7
Home and Office Security Safes
Your Combination
The combination for your safe can be found imprinted on the inside back cover
of this Operation and Installation Guide. It is a pre-set 4 number sequence that is
unique to your safe and cannot be changed. It is recommended that you keep this
Operation and Installation Guide in a secure place. NEVER store this Guide inside
the safe.
Opening Safe with Combination Dial
1. Turn the dial LEFT (counter clockwise) three times to clear prior settings.
2. Begin by placing dial on 0 (zero).
3. Turn the dial LEFT, passing the first combination number FOUR (4) times and
stop at the number on the fifth time around.
4. Turn the dial RIGHT, passing the second combination number TWO (2) times
and stop at the number on the third time around.
5. Turn the dial LEFT, passing the third combination number ONE (1) time and
stop at the number on the second time around.
6. Turn the dial RIGHT and STOP on the fourth combination number.
7. Insert the Entry Key into the key lock, turn to the right, and pull the door open.
Opening The First Time
The dial is preset to the fourth (last) number in the combination. The safe door
should open when you insert the Companion Entry Key (round top), turn to the
right and pull the door open. The dial may move in transit, making it necessary
to dial the combination before opening the first time We recommend
trying the following combination procedure with safe door open first.
Closing & Locking The Safe
1.
When open, the key is turned right (the unlocked position).
2.
Close the safe door and turn the key to the left.
3.
Remove the key and spin the combination dial twice.
Frequent Key-Only Access
When circumstances require frequent, quick and convenient access for limited
periods during the day, you may choose to keep the commbination positioned
on the last number and lock only the keylock. However, the safe is not fully
locked until spinning the dial.
Important: REDUCED LEVEL OF SECURITY
The safe is ONLY FULLY LOCKED after turning key to the locked position and spinning
the dial. For your security, we recommend always locking both the combination dial
and key lock for the highest level of protection & security.
Consumer Affairs
How to Contact Us
Phone:
1-800-223-8566 (USA and Canada)
Monday through Friday, 7:30 am to 4:30 pm Pacific Standard Time
Mail:
Attn: Consumer Affairs Dept.
BRK / SISCO
2835 E. Ana Street
Rancho Dominguez, CA 90221
Ordering Replacement Keys
If a key becom
es misplaced or you would like additional keys, you may conveniently
purchase them from our Consumer Affairs Department. You must supply the following
information to assure accurate processing:
• Name / Address / Telephone
• Safe Model Number / Serial Number
• Key Number (located on the key and on the Emergency Override Key lock)
• Number of keys requested
• E-mail address if available
In the USA, replacement keys are available for a fee and credit card orders are accepted
by telephone or via our web site. Checks or Money Orders are required for orders
received by mail and should be made payable to SISCO. Contact our Consumer Affairs
Department for costing information prior to ordering.
EUROPE
email: [email protected]