FRIGIDAIRE Grill - Manual (Page 6)

SIDE BURNER PARTS ASSEMBLY
1. Attach the side shelf to the grill by inserting the shelf
hooks into the slots on the side of the grill and pushing
down on the shelf assembly until level with the grill.
(See Fig. 8)
2. Lock the side shelf in place by inserting (2) hex head
screws in the side burner. (See Fig. 9)
NOTE: A power screwdriver extension is needed to
insert screws.
3. Install burner and cap. (See Fig. 10-11)
4. Install grate over burner. (See Fig. 12)
5. Attach the three (3) wires coming out from the side of
the grill and the side burner wire to the igniter terminals.
(See Fig. 13-14)
NOTE: It does not matter which wire goes to which
terminal on the igniter.
6
Side Burner Assembly
Fig. 10
Fig. 11
Fig. 8
Fig. 9
Screw Holes
Fig. 12
Fig. 13
Fig. 14
Side Shelf Tabs
Back of side burner.