Using your ventsurface – Fisher & Paykel IZONA HC90 User Manual
Page 7
5
Using your VentSurface
1
2
3
4
5
6
1
Fan on/off (Stand-by)
2
Decreases fan speed
3
Mode, speed and cleaning alert display
4
Increases fan speed
5
Timer
6
Lamps on/off
Using your VentSurface for the first time or after a long holiday
1
Make sure your cooker or cooktop is turned off and there are no draughts in the room.
2
Make sure your VentSurface is on stand-by (ie plugged into a power outlet which is switched on
at the wall but the fan is off ).
3
Press the
and
buttons simultaneously for three seconds. The VentSurface will beep briefly.
You now have manually recalibrated your VentSurface.
4
Set the VentSurface to normal or high power mode (see instructions following).
5
Set the VentSurface to automatic or manual mode (see instructions following).
Control panel features
Fig.1 Control panel