Farallon Communications NetLINE - Manual (Page 10)

10 Chapter 2
I NSTALLING THE SOFTWARE
After you inser t your NetLINE PC Card into your
computer’s PC card slot, the Windows Found New
Hardware Wizard will appear. See the following pages for
software installation instructions for:
■ Windows 98
■ Windows 95
■ Windows 2000
■ Windows NT 4.0
After you have installed the driver, connect the card to
your Ethernet network. See “Connecting to the network”
on page 14.
W INDOWS 98
1. The Add New Hardware Wizard appears and searches
for device drivers for the
Farallon NetLINE PC Card .
Click the Next button.
2. Select Search for the best driver for your device and
click Next .
3. Inser t the Farallon Windows diskette into your
computer. Type
A: in the “Specify a location” box and
click Next .
4. When the Wizard locates NETEP16.inf , click Next .
5. If prompted to locate Ep16.sys , type A:\Win98 in the
“Copy files from” box. Then click OK.
6. If prompted for the Win98 CD, copy the necessar y
files from the CD ROM drive of your computer.
7. Click Finish and Yes to restar t your computer.