Farallon Communications NetLINE - Manual (Page 17)

Operation 17
D IAGNOSTIC UTILITY
Use the Diagnostic Utility included on the Farallon
diskette as a troubleshooting tool.
1. Boot to MS DOS. (If you are using Win98/2000, use
a Win95 star tup disk.)
2. Inser t the Farallon diskette in your computer’s disk
drive.
3. Type ep16diag and Enter.
4. Select Adapter Basic Diagnostics and Enter.
5. Make sure all of the listed test items pass, including:
■ Current I/O Base Address
■ EEPROM
■ LAN Setup Registers
■ Memor y
■ LAN Controller Functions
■ Loopback Mode Testing
6. If any items fail, tr y another card and connection to
see if the problem is system related. If the other card
passes, the problem may be related to the NetLINE
PC Card.