Ferris Industries SKU 319618 - Manual (Page 14)

VIDEO OUT
•
YUV
•
S-VIDEO
•
P-SCAN
14
Basic Setup(continued)
LT/RT
When the disc you played has PRO LOGIC stereo function,
you can select this.
STEREO
2-channel stereo output, for stereo listening through the
analog left and right outputs.
VSS
2-channel virtual surround outputs.
Note: Depending on the disc, the actual outputs may
not match your selection.
•
•
•
DOWN MIX
To play a DVD disc recorded with surround multi-channel audio
correctly. Select the appropriate setting according to your audio
system.
The BRIGHTNESS, CONTRAST, and SATURATION are the same
User Interface. The default setting for the BRIGHTNESS and the
CONTRAST is 6; the default setting for the HUE
and the SATURATION is 0.
/ / /
VIDEO SETUP
1. Press SETUP on the remote control.
2. Use to select item you want.
3. Press ENTER to confirm the selection.
4. To exit the setup, press SETUP again.
This section includes:
•
BRIGHTNESS
•
CONTRAST
•
HUE
•
SATURATION
•
VIDEO OUT
P-SCAN
HUE
BRIGHTNESS, CONTRAST, HUE, SATURATION
The default setting for the P-SCAN is OFF. If you set it ON
and your TV support this function then it will appear as follows.