Freedom9 2420 - Manual (Page 26)

freeConnect Smart 2420 User’s Manual
23
6.10.5 Backup Setting
The Backup Setting page (Figure 26) allows you to back up the current settings of the Switch to a file
that can be saved on your computer. It also allows you to restore the settings to the Switch from a
backup file. Click the “Backup” button to generate a backup file, and select a location on your
computer to save it to.
To restore a previous backup file to the Switch, you must specify the location of the backup file and
click the “Restore” button to load the previous settings.
Note: when restoring a recorded file, the current password will not be erased.
Figure 26: Backup Setting Page
6.10.6 Reset Setting
The Factory Reset page (Figure 27) allows you to reset the Switch back to its factory default settings.
Note that all of the settings of the Switch will be reset, and the IP address of the device will be set to
default setting of 192.168.0.1.
Figure 27: Reset Setting
6.11 Logout
Selecting this option will log you of the web interface (Figure 28).
Figure 28: Logout