FARGO electronic Maestro 900 - Manual (Page 13)

Confidential, the whole present document is the sole property of Fargo Telecom (Asia) Ltd. 11
3.2.5 AT+IPGPRS
Description:
This command is used to setup GPRS network parameters for the AutoTCPUDP feature.
Syntax:
Command Syntax
AT+IPGPRS=,,,
Response Syntax
+IPGPRS: ,,,
Command Possible responses:
AT+ IPGPRS? +IPGPRS: 1,"INTERNET","" ,””
OK
Note : show current settings
AT+ IPGPRS=1 OK
Note: set Cid value to 1
AT+ IPGPRS =1,”INTERNET” OK
Note: set the PDP value to 1 and APN to “INTERNET”
AT+ IPGPRS=? +IPGPRS: (1-4),(100),(50),(50)
OK
Note: possible values
Defined Values :
PDP context identifier.
Note: to use with AT+AUTOTCP/ AT+AUTOUDP command this value must be set to 1.
Access point name of the GPRS network. Max 100 characters.
User name to access the GPRS service. Max 50 characters.
Password used to access the GPRS service. Max 50 characters.