Fisher-Price M9523 - Manual (Page 4)

IMPORtANt! This step must be completed before attaching
the seat to the frame assembly.
•
"Snap" the support bar onto the pegs on the top of the
frame assembly.
4
Support Bar
Frame Assembly
• "Snap" the tray handles into the holes in the seat.
1 5
tray
• Insert two M4,5 x 18mm washer head screws into the holes on
the bottom of the seat, as shown.
• Tighten the screws.
1 9
• "Snap" the bear toy into the slot in the seat.
1 10
Seat