FUJITSU PLASMAVISION PDS5002W - Manual (Page 32)

E-30
• Setting Display Information (OSD) All modes
You can use this option to select whether to display information other than menus. (Error messages
are displayed regardless of what choice you make for this option.)
Each time you press or , one of the available choices appears in the following sequence:
On Off
On : Displays all information.
Off : Displays only menus and error messages.
Press to store.
• Selecting Language (Language) All modes
You can use this option to select the language displayed on the screen.
(1) Select “Language” and press .
The “Language” selection screen will appear.
(2) Press or to select your desired language.
English
Deutsch (German)
Español (Spanish)
Français (French)
Italiano (Italian)
Português (Portuguese)
(3) Press .
The menu is displayed in the selected language.
OTHER ADJUSTMENTS (FEATURES MENU)(Continued)
• Displaying the optimum movie pictures (24 Frame Mode)
Can make the optimum display of 24 frames/second signals such as movie pictures.
Each time you press or , one of the available choices appears in the following sequence:
On Off
On : Displays the optimum movie pictures.
Off : Displays normal pictures.
Press to store.
*Some type of signal can not be selected.
• Setting 3D Y/C Circuit (3D Y/C)
Selects whether to use the 3D Y/C circuit.
Each time you press or , one of the available choices appears in the following sequence:
On Off
On : Enables the 3D Y/C circuit.
You can make this selection only for 3.58NTSC signal.You can make the optimum display for the movie film signals.
Off : Enables 3-line.
Press to store.
FUNCTION
ON SCREEN MENU
"Language" selection screen