Fujitsu Siemens Computers Primergy RX220 - Manual (Page 8)

System configurator and order-information guide
B PRIMERGY RX220 Status 2005-12-20
Section II Processor
There are 2 processor 940 pin sockets available. One CPU is included in each basic unit.
It is also possible to upgrade a dual-processor system later on.
Two processors with different clock frequencies or different caches are not possible.
A multi-processor operating system is required for a dual-processor system.
2nd. CPU
S26361-F3167-E244 S26361-F3167-E246 S26361-F3167-E248
Opteron 244 with 1.8 GHz Opteron 246 with 2.0 GHz Opteron 248 with 2.2 GHz
with 1MB SLC on Chip with 1MB SLC on Chip with 1MB SLC on Chip
(SLC=Second Level Cache) (SLC=Second Level Cache) (SLC=Second Level Cache)
and passive heat sink and passive heat sink and passive heat sink
occupies CPU socket occupies CPU socket occupies CPU socket
max. 1x per system max. 1x per system max. 1x per system
S26361-F3167-E250 S26361-F3167-E252 S26361-F3167-E254
Opteron 250 with 2.4 GHz Opteron 252 with 2.6 GHz Opteron 254 with 2.8 GHz
with 1MB SLC on Chip with 1MB SLC on Chip with 1MB SLC on Chip
(SLC=Second Level Cache) (SLC=Second Level Cache) (SLC=Second Level Cache)
and passive heat sink and passive heat sink and passive heat sink
occupies CPU socket occupies CPU socket occupies CPU socket
max. 1x per system max. 1x per system max. 1x per system
S26361-F3167-E265 S26361-F3167-E270 S26361-F3167-E275
Opteron 265 with 1.8 GHz Opteron 270 with 2.0 GHz Opteron 275 with 2.2 GHz
with 2x 1MB SLC on Chip with 2x 1MB SLC on Chip with 2x 1MB SLC on Chip
(SLC=Second Level Cache) (SLC=Second Level Cache) (SLC=Second Level Cache)
and passive heat sink and passive heat sink and passive heat sink
occupies CPU socket occupies CPU socket occupies CPU socket
max. 1x per system max. 1x per system max. 1x per system
Section III Memory
There are 8 memory slots available (4 banks, each bank consists of two slots => 2 modules per bank are necessary).
They can optionally be equipped with 512MB, 1GB, 2GB (or 4GB if available) registered DDR 400 PC3200 SDRAM modules.
In every basic unit the first memory bank is already equipped with either 1GB, 2GB or 4GB memory,
so the memory extensions can still be configured up to three times for the second, third and fourth memory bank.
Note: Memory is directly connected to the CPU. So, if only one CPU is configured only 4 modules are possible.
Then 1x memory extension can be ordered. For a Dual CPU configuration 3x memory extension can be ordered.
Maximum configurable memory extension is 16 GB (or 28GB when 4 GB modules are available), depending on basic unit.
ECC with memory scrubbing and Chipkill is standard for RX220.
S26361-F3166-E521 S26361-F3166-E522
Main memory 1GB Main memory 2GB
PC3200 registered DDR RAM PC3200 registered DDR RAM
consisting of two modules consisting of two modules
occupies 2 slots / 1 bank occupies 2 slots / 1 bank
max. 1x or 3x per system max. 1x or 3x per system
1x or 3x
as soon as available
S26361-F3166-E523 S26361-F3166-E524
Main memory 4GB Main memory 8GB
PC3200 registered DDR RAM PC3200 registered DDR RAM
consisting of two modules consisting of two modules
occupies 2 slots / 1 bank occupies 2 slots / 1 bank
max. 1x or 3x per system max. 1x or 3x per system
Section IV Graphics
Graphics controller on-board (ATI Radeon, 16MB)
C
Fujitsu Siemens Computers
Enterprise Products PRIMERGY Server 8 of 15