Furuno 1724C User Manual
Page 232
SP - 3
4.6 Output
Data
Alarm signal
12 VDC, 100 mA or less
NMEA 0183 Ver1.5
GGA, GLL, RMA, RMC, GTD, VTG, ZDA (GPS data required)
RMB, WPL, BWC or BWR, APB, AAM, BOD, XTE, VHW, MTW,
DPT or DBT, HDT, HDG, MWV, ZTG
TLL (L/L, Heading data required), TTM (ARPA required)
5 PLOTTER
FUNCTION
5.1 Projection
Mercator
5.2 Usable Area
85 latitude or below
5.3 Effective Area
133.4 x 97.3 mm
5.4 Display pixels
480 x 640 dots
5.5 Position Indication
Latitude/longitude, Loran C LOP, DECCA LOP or MGRS
5.6 Effective Projection Area 0.125 nm to 2,048 nm (at equatorial area)
5.7 Track Display
Plot interval: by time (1 sec. to 99 min. 99 sec.) or
by distance (0 to 99.99 nm)
5.8 Track Colors
Red, yellow, green purple, light-blue, blue, white
5.9 Memory Capacity
Track/mark: 8000 points, Waypoint: 999 points
5.10 Storage Capacity
Simple route: 200 routes with 35 waypoints each
5.11 MOB
1 point
5.12 Quick Routes
1 course with 35 waypoints max.
5.13 Electronic Chart
SD Card: NAVIONICS Gold Chart card, or
C-MAP NT MAX chart card
5.14 Alarms
Arrival and Anchor watch, Cross track error and proximity
alarms, Ship’s speed in and out alarms, Water temperature,
Trip alarm, Fish alarm, Bottom alarm (ETR required), Grounding
alarm (C-MAP only)
6 POWER
SUPPLY
6.1 Rated
Voltage/Current
M1724C
12-24 VDC: 5.9-2.8 A
M1734C
12-24 VDC: 5.6-2.7 A
6.2 Rectifier (option)
PR-62: 100/110/115/220/230 VAC, 1 phase, 50/60 Hz