FUJITSU 50FH5037E-02 - Manual (Page 57)

6.3.2 CONTROL command
This command sets the scanner to the operation mode.
Byte 1
CNT
Byte 2
CMD
Byte 3
TEXT
Byte 4
or later
X©0xπ * X©58π
Control register
start number.
Control register
* : x = 04 or more (relating with number of control registers)
Control register start number.
Byte 3 (control register start number.) specifies the starting control register.
7
0
6
0
5 4 3 2 1 0
LSB MSB
First control register number.
Control register
The control register specifies the scanner operation mode. Byte 4 and more specifies
the control registers used in this command.
Note:
Control registers #6 to #9 are not defined.
50FH5037E>02 6 $ 7