Ms series specifications, Inputs outputs, Video (if present) – Furman Sound CONFIDENCE MS2A-1 User Manual
Page 11
11
Inputs
Outputs
Analog audio:
2 (or 4) each female balanced XLR
CMRR:
>90 dB, 20 Hz to 20 kHz
Differential Input Impedance:
24 k
Ω
Maximum Input Level:
+25 dBu
Signal present indicator:
-20 dBu sensitivity
Digital audio:
1 (or 2) each BNC, AES/EBU
(if present)
Resolution:
24 bit
Sampling Frequency:
16 kHz to 96 kHz
Oversampling:
8X
Internal Clock:
256 x Sampling Frequency
THD+N:
-83 dB
Dynamic Range:
95 dB
Signal to Noise Ratio:
97 dB
Channel Separation:
95 dB
Internal Analog Filter:
-3 dB at 32 kHz
Video:
1 each BNC Video, auto sense NTSC/PAL
(if present)
Input level:
1.0 V
p-p
composite video
(to EIA RS-170A and PAL Standards)
Analog audio:
2 each male balanced XLR
Maximum Output Level:
+25 dBu into 1 k
Ω
Gain Trim:
±6 dB (dual ganged stereo control)
Signal Present indicator:
-20 dBu sensitivity
Differential Output Impedance:
50
Ω with load capacitance of
up to 1
µF
Frequency Response:
20 Hz to 200 kHz
THD+N:
.002%
Headphone:
Power:
270 mW into 56
Ω, both channels
driven
THD+N:
.003%
Display type:
TFT, LCD
Screen Size (diagonal):
1.8 inch
Active Display Area:
48.6 mm W x 39.6 mm H
Number of pixels:
280 W x 220 H
Dot Pitch:
0.127 mm W x 0.121 mm H
Brightness:
140 cd/m
2
typical (140 cd/m
2
min.)
Contrast Ratio:
100 typical (60 minimum) at
optimized viewing angle
Viewing Angle:
Left/Right: ±45° H (at CR>10)
Top/Bottom:
±10°/30° V (at CR>10)
Video (if present)
MS Series Specifications