Furman Sound Q-Series Equalizer EQ-2151 - Manual

T T
H H
EE
PP
RR
OO
FFEE
SSSS
IIO
ON
NA ALLSS''
C H O I C E S
I N
C
E
1
9
7
4
The Q-Series
Furman offers fi ve different equalizers to best suit your needs: from a
single-rack-space mono 31 band, to a stereo 15 band with 60 mm long
throw sliders and VU metering in a two rack space.
The new Furman Q-Series EQ’s are designed for use by live sound
engineers, recording studios, and musicians. These units feature constant Q
circuitry with 4% center frequency accuracy. Each is equipped with 1⁄4” TRS
and XLR balanced inputs/outputs, and RCA unbalanced inputs/outputs for
the fl exibility to interface with a variety of systems.
Switchable to a +/-6 range for more control and better dynamics, they feature
+/-6 and +/-12 range LED indicators. Each channel bypass switch has a red
LED indicator to compare the equalized sound to the original sound, and
each channel is outfi tted with a clip LED for overload detection. A shielded
internal power supply provides for low noise operation. Selectable AC input
voltage between 120 VAC 50/60HZ and 240 VAC 50/60 HZ allows for use in
almost any location. Durable all steel construction makes these units perfect
for life on the road.
The Furman Q-Series is protected by a three-year limited warranty covering
defects in materials and workmanship.
SPECIFICATIONS
Frequency Response 20HZ to 20KHZ +/-0.5 dB
THD .01% @ +4 dBu
Input Impedance Balanced 20K ohms, Unbalanced 15K ohms
Maximum Input Level +20 dBu
Output Impedance Balanced <150 ohms, Unbalanced <100 ohms
Maximum Output Level +22 dBu
Common Mode Rejection >75 dB @ 60HZ
Signal to Noise Ratio 94 dB (20KHz Noise Bandwidth)
Low Pass Filter 10Hz - 250Hz, 12dB/Octave
High Filter 3KHz - 40KHz, 12dB/Octave
Dimensions
Q-2151, Q-1311 1.75”(H) x 19”(W) x 8.5”(D)
Q-2152V, Q-1312V, Q-2312 3.50”(H) x 19”(W) x 8.5”(D)
F u r m a n S o u n d , I n c . l 1 9 9 7 S . M c D o w e l l B l v d . l P e t a l u m a , C A 9 4 9 5 4 - 6 9 1 9
P h o n e : 7 0 7 . 7 6 3 . 1 0 1 0 l Fa x : 7 0 7 . 7 6 3 . 1 3 1 0 l w w w. f u r m a n s o u n d . c o m
All Q-Series Equalizers Feature:
•
Constant Q circuitry
•
XLR and 1/4” balanced inputs/
outputs and unbalanced RCA
inputs/outputs
•
Bypass switch
•
Selectable boost and cut range of
6dB or 12 dB
•
Switchable input AC voltage
•
Road-worthy steel construction
•
Three year limited warranty
Additional Features:
Q-1311
Single Channel 31 Band Graphic EQ
•
Short throw sliders
•
High and low cut fi lters
Q-1312V
Single Channel 31 Band Graphic EQ with VU Meter
•
Long throw sliders
•
VU output meter
•
High and low cut fi lters
Q-2151
Dual Channel 15 Band Graphic EQ
•
Short throw sliders
Q-2152V
Dual Channel 15 Band Graphic EQ with VU Meter
•
Long throw sliders
•
VU output meters
Q-2312
Dual Channel 31 Band Graphic EQ
•
Short throw sliders
•
High and low cut fi lters
63004-A