beautypg.com

Caution, Care & cleaning – FRIGIDAIRE 316901301 User Manual

Page 31

background image

31

The door is heavy. For safe, temporary storage, lay the door

flat with the inside of the door facing down.

To remove oven door:

1. Open oven door completely (horizontal with floor - See

Fig. 1).

2. Pull the door hinge locks on both left and right door

hinges down from the oven frame completely towards

the oven door (See Fig. 2). A tool such as a small flat-

blade screwdriver may be required.

3. Firmly grasp both sides of oven door along the door

sides (Do not use the oven door handle - See Fig. 3).

4. Close the door to the broil stop position (the oven door

will stop into this position just before fully closing).

5. With the oven door in the broil stop position, lift the

oven door hinge arms over the roller pins located on

each side of the oven frame (See Fig. 4).

To replace oven door:

1. Firmly grasp both sides of oven door along the door

sides (Do not use the oven door handle - See Fig. 3).

2. Holding the oven door at the same angle as the removal

position, seat the hook of the hinge arm over the roller

pins located on each side of the oven door frame (See

Fig. 4). The hook of the hinge arms must be fully

seated onto the roller pins.

3. Fully open the oven door (horizontal with floor - See

Fig. 1).

4. Push the door hinge locks up towards and into the oven

frame on both left and right oven door hinges (See Fig.

2) to the locked position.

5. Close the oven door.

Special door care instructions - Most oven doors

contain glass that can break.

Read the following recommendations:

1. Do not close the oven door until all the oven racks are

fully in place.

2. Do not hit the glass with pots, pans, or any other

object.

3. Scratching, hitting, jarring or stressing the glass may

weaken its structure causing an increased risk of

breakage at a later time.

Removing and replacing the lift-off oven door

CAUTION

Oven door

hinge

locations

with oven door

fully open.

Fig. 1

Fig. 2

Fig. 4

CARE & CLEANING

LOCK

roller

pin

hinge

arm

Fig. 3