FRIGIDAIRE 220218A007 - Manual (Page 5)

5
Auto
Temp
LIGHT
ON/OFF
REMOTE CONTROL
ACTIVATE
TIMERS
FAN
SPEEDS
SETS
MODES
ADJUSTS
TEMP &
TIMES
Air Conditioner Features
UNIT CONTROL
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and
all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the
unit control alone or with the remote.
Battery Size: AA
Warning: do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
TO TURN UNIT ON:
NOTE: The following instructions represent the Unit Controls, the same instructions can be used for the Remote Control.
SZ000728(En)-Yaokong 09/20/2005, 5:30 PM 5
DISPLAYS
TEMPERATURE/TIME
FAN SPEED
ACTIVATES
TIMER
CHECK FILTER
RESET BUTTON
SETS MODE
TURNS UNIT
ON OR OFF
AUTO TEMP
FEATURE
SLEEP MODE
SETS FAN SPEEDS
DO THIS:
PRESS ON/OFF
BUTTON
YOU WILL SEE:
YOU WILL SEE:
Note: Tap or hold either up( ) or down( ) button until the desired temperature is seen on the display. This temperature will be auto-
matically maintained anywhere between 60˚F (16˚C) and 90˚F (32˚C). If you want the display to read the actual room temperature. See
“To Operate on Fan Only” section on Page 6.
TO CHANGE
TEMPERATURE SETTING:
PRESS TO RAISE
PRESS TO LOWER
DO THIS:
AUTO TEMP
ADJUSTS
TEMP &
TIMES