Fisher & Paykel DD60S 7 - Manual (Page 9)

9
The following calculations assume the top of the panel is aligned
with the top of the adjacent cabinetry:
WIDTH OF THE PANEL
Measure A (the width between adjacent door/drawer fronts)
and write it in the fi rst box below, then complete the equation.
HEIGHT OF THE PANEL
Measure B and write it in the fi rst box below, then complete
the equation.
min. 2 mm
min. 2 mm
min. 8 mm ventilation gap
min. 8 mm ventilation gap
min. 2 mm min. 2 mm
WIDTH OF PANEL
HEIGHT
OF PANEL
A
B
A
B
clearance to
adjacent cabinet
front (min. 2 mm)
ventilation gap
(min.8 mm)
WIDTH OF PANEL
(min. 596 mm)
HEIGHT OF PANEL
- 2 x
-
=
=
FRONT PANEL SPECIFICATIONS
16 -20 mm panel thickness
Adequately sealed to withstand moisture (50 O C @ 80% RH)
Maximum weight of panel: 9 kg
6b
Note: when the top of the dishwasher has to be lower than the adjacent cabinetry,
the panel can be increased in height.
INTEGRATED MODELS WITH BADGE (GB IE) ONLY - CUSTOM FRONT PANEL CALCULATIONS