beautypg.com

FujiFilm FUJICOLOR SUPERIA AF3-151E User Manual

Page 3

background image

– 3 –

FUJICOLOR SUPERIA X-TRA 400 [CH] • FUJIFILM PRODUCT INFORMATION BULLETIN

7. FILM HANDLING

Expose film before the expiration date indicated on
the film package and process as soon as possible
after exposure.

When loading and unloading roll film, avoid direct
sunlight. If there is no shade, turning one’s back to-
ward the sun will shade the film.

Camera-loaded film should be exposed and pro-
cessed immediately.

Unprocessed film should be kept away from X-rays
used to inspect checked-in baggage, etc. at airport
terminals. Strong X-rays can cause fogging of un-
processed film. It is recommended such film be
placed in your carry-on baggage whenever possible.
(Consult with airport personnel for details.)

Film fogging may occur near X-ray equipment used
in hospitals, factories, laboratories and other loca-
tions. Always keep film away from possible sources
of radiation.

9. SPECIFICATIONS AND PACKAGING

9-1 Specifications

Item

• Code
• Speed
• Type
• Process

• Size

• Production Number

CH

ISO 400/27°

Daylight

CN-16, CN-16Q, CN-16FA,

CN-16L, CN-16S or C-41

135: 12-, 24- and 36-exp.

X01 and above

8. FILM STORAGE

Unprocessed Film

Storing exposed or unexposed film under hot and
humid conditions may adversely affect speed, color
balance and physical property changes. Store film
under the following conditions.

Ï

Ordinary Storage: Protect from heat.

Ï

Long-term Storage: Below 0°C (32°F)

Building materials, finishes used on newly manufac-
tured furniture, paints and bonding agents may pro-
duce gases which affect photographic film. Do not
store film, lightproof boxes of film, loaded cameras or
film holders near these materials.

Before use, allow films to stand at room-temperature
over 1 hour. Opening the package/box while film is
cold may cause harmful condensation.

Processed Film

Exposure to light, high temperature and humid condi-
tions can cause color changes in processed films.
Therefore, place such films in sleeves and store them in
dark, dry, cool and well ventilated locations under the
following conditions.

Ï

General Storage:

Below 25°C (77°F) at 30% to 60% RH

Ï

Long-term Storage:

Below 10°C (50°F) at 30% to 50% RH

NOTE

As with all color dyes, those used in this film will dis-
color or fade with time.

9-2 Edge Markings

Item

• Edge Stripe

• Type Designation
• Latent Image Bar Code
• FUJIFILM Identification

Code
Negative Carrier

: 135B

: 135C/D/J/K/S

One red solid line and one

green short broken line on one

side (changed)

400

12-8

0118

280