Fagor America SFA-8CELX - Manual (Page 6)

11
EN
10
EN 4 / PREPARING YOUR ITEMS
• CHECKING THE CONDITION OF YOUR TEXTILES
— Open the door by pushing (press where the
label is)
(Fig. 06).
— Check that the filter is in its housing .
— Insert washed and spun clothes loosely in
the drum w
wiitth ho ou utt ffo olld diin ng g iitt o orr p piilliin ng g iitt u up p..
— Take care not to let any fabrics get caught in
the door.
— Close the door.
• • Recommended volumes :
The maximum capacity of the dryer is 8 kg.
— To reduce creasing and optimize drying
times, we recommend you do not overload
the machine.
• INSERTING YOUR ITEMS IN THE DRUM
Fig. 06
Advice :
If, before you insert your clothes in the
tumble dryer, you notice any stains, even
after washing, do not dry the items concer-
ned. As a general rule, stains that have been
ironed or tumble-dried can no longer be
removed.
Please refer to the instructions for treating
stubborn stains provided in most washing
machine instruction manuals and, in particu-
lar, wash the stained items again.
• • Preparing your items :
— Close all zippers and snap buttons.
— Remove any loose buttons, pins or hook
fasteners.
— Knot any belts, apron strings, etc...
— Empty pockets.
— Always adhere to the manufacturer's ins-
tructions when using softening products.
Important :
Do not tumble-dry the following
articles :
— Clothing including rubber like materials (for
example: shower caps, waterproof clothing
and textiles, linings, pillows etc.)
— Chlorofibres (Thermolactyl* for example)
*Registered trademark
— Items containing underwiring that could
become detached
— Bulky items (duvets, eiderdowns, etc...)
— Laundry that has not been spun
— Laundry cleaned with inflammable chemi-
cals.
Important :
Check the labels on your textiles
Normal
drying Gentle
drying
Do not tumble dry
3 / INSTALLING YOUR TUMBLE DRYER
• ELECTRICAL CONNECTION
Danger :
To make the electrical connection to your appliance :
— Do not use an extension, an adapter, a multiple socket or a programmable timer.
— The plug must be easily accessible but be out of children’s reach.
— If there's any doubt about the condition of your installation, contact your installer or a qualified
Brandt-approved professional.
— Never eliminate the electrical Earthing system.
The Dryer comes with a 16AWG Cord and NEMA 6-15P plug
It should be connected to a 240V, 15A, 60Hz AC 2 Phases + wire grounding power outlet (NEMA
6-15R) is necessary.
We cannot be held responsible for any incident caused by poor electrical installation.
Advice :
In order to easily find your appliance’s reference numbers in the future, we recommend
that you note them down on the “After-Sales Service and Consumer Relations” page (this page
also explains where to find these on your appliance).
Your appliance complies with UL 2158 (Electric clothes Dryer).
• REPLACING THE ELECTRIC POWER CABLE
Important :
To ensure your safety, this must be carried out by the manufacturer's after-sales service
team or a qualified professional.
The dryer must be installed in accordance with all local codes or, in the absence of a local code :
— in the U.S.A., in accordance with the National Electric Code, ANSI/NFPA 70 - latest edition/State
and Municipal codes and/or local codes.
— in Canada, in accordance with the Canadianl Electric Code, C22.1 - latest edition/Provincial and
Municipal codes and/or local codes.