Flymo SCIROCCO 2200 - Manual (Page 8)

SAFETY PRECAUTIONS
Maintenance and storage
1. Keep all nuts, bolts and screws tight to be sure
the Gardenvac is in a safe working condition.
2. Replace worn or damaged parts for safety.
3. Always store the product in a dry place ensuring the
cable is not likely to be damaged on sharp edges etc.
4. Inspect the collection bag regularly. If the collection
bag becomes worn or damaged, replace.
GUARANTEE AND GUARANTEE POLICY
If any part is found to be defective due to faulty
manufacture the guarantee period, Husqvarna Outdoor
Products, through its Authorised Service Repairers will
effect the repair or replacement to the customer free of
charge providing:
(a) The fault is reported directly to the Authorised
Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d) The failure has not occurred through fair wear and
tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any person not
authorised by Husqvarna Outdoor Products.
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
*
This guarantee is additional to, and in no way
diminishes the customers statutory rights.
Failures due to the following are not covered, therefore it
is important that you read the instructions contained in
this Operator's Manual and understand how to operate
and maintain your machine:
Failures not covered by guarantee
* Replacing Cutting Line.
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in
accordance with the instructions and
recommendations contained in this Operator's Manual.
* Machines used for hire are not covered by this
guarantee.
* The following items listed are considered as wearing
parts and their life is dependent on regular
maintenance and are, therefore not normally subject
to a valid warranty claim: Electric Mains cable, Debris
Bag.
* Caution!
Husqvarna Outdoor Products does not accept liability
under the warranty for defects caused in whole or part,
directly or indirectly by the fitting of replacement parts
or additional parts that are not either manufactured or
approved by Husqvarna Outdoor Products, or by the
machine having been modified in any way
ENGLISH - 2
Environmental Information
Husqvarna Outdoor Products are manufactured under
an Environmental Management System (ISO 14001)
using, where practical, components manufactured in the
most environmentally responsible manner, according to
company procedures, and with the potential for
recycling at the end of the products’ life.
• Packaging is recyclable and plastic components have
been labelled (where practical) for categorised
recycling.
• Awareness of the environment must be considered
when disposing of ‘end-of-life’ product.
• If necessary, contact your local authority for disposal
information.
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
and electronic equipment.
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for
the environment and human health, which could
otherwise be caused by inappropriate waste handling of
this product.
For more detailed information about recycling of this
product, please contact your local council office, your
household waste disposal service or the shop where
you purchased the product.
Service Recomendations
• Your product is uniquely identified by a silver and black product rating label.
• We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.
Access Screw
Securing the Access Screw
1, Remove the label from over the Access Screw
(K).
2. Turn the Access Screw 2-4 times clockwise (L)
until tight (do not overtighten)
• Important:- Your product will not operate if the
Access Screw is not tightened.
IMPORTANT - WHEN STORING PRODUCT:
Always ensure Access Screw is unscrewed back from
the switching position by approximately 3 full turns prior
to storage.(T)
Be careful to ensure the motor housing does not pivot
open.
Remember to tighten Access Screw before re-using the
product.
Suction Tube
When the Suction Tube is locked into the operating position (B2), this is a permanent
fixture. The Suction tube cannot be pushed back to its packaged position.