FUNAI MSD125 - Manual (Page 9)

Paused and Step-by-Step Playback
Hit [PAUSE F F ] during playback.
To continue playback, hit [PLAY B].
The disc goes forward by one frame each time [PAUSE F F ]
is hit during the pause mode.
To continue playback, hit [PLAY B].
DVD-V DVD-V
CD CD DVD-V DVD-V
Hint Hint
• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8) and 3(1/2).
• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the
slow playback mode are blurred. (Refer to pages 14-15.)
– 9 – EN
Functions
Fast Forward/Reverse Search
Press [FWD g g ] or [REV h h ] repeatedly dur-
ing playback to select the required forward or
reverse speed.
To continue playback, hit [PLAY B].
Slow Forward/Slow Reverse
Press [FWD g g ] or [REV h h ] repeatedly dur-
ing the pause mode to select the required for-
ward or reverse speed.
To continue playback, hit [PLAY B].
DVD-V DVD-V
CD CD DVD-V DVD-V
STANDBY–ON
AUDIO
SUBTITLE
ANGLE
REPEAT CLEAR
A-B PAUSE
SETUP TOP MENU MENU
SLOW
SKIP
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1 2 3
4 5 6
7 8 9
0 +10
PLAY
REV FWD
STOP
Before: Turn on the TV, amplifier and
any other equipments which are con-
nected to this unit. Make sure the TV
and audio receiver (commercially avail-
able) are set to the correct channel.
1 1 2 2
3 3
PLAY
4 4
3 3
Functions
4 4
STOP
STANDBY–ON OPEN/CLOSE
DVD menu
Some discs contain menus which allow you to customize
DVD playback. Press [K
K / L L / s s / B B ] to select an item, then
press [ENTER] (or [PLAY B B ]).
Calling Up a Menu Screen during Playback
• Hit [MENU] to call up the DVD menu.
• Hit [TOP MENU] to call up the title menu.
E 1
1
CD CD DVD-V DVD-V
Hint Hint
• A “prohibited icon” may appear at the top-right on the TV
screen when the operation is prohibited by the disc or this unit.
• Some DVDs may start playback from title 2 or 3 due
to specific programs.
• During the playback of a two-layered disc, pictures may stop
for a moment. This happens while the 1st layer is being
switched to the 2nd layer. This is not a malfunction.
Operations described after this section are mainly based on the remote control use. Some operations can be carried out on main unit.
1 1
Playback
Hint Hint
• On DVDs, set “STILL MODE” to “FIELD” in the Display menu if pic-
tures in the pause mode are blurred. (Refer to pages 14-15.)
IR
SENSOR
P.SCAN
STANDBY-ON STOP OPEN/CLOSE PLAY
y
1 1 3 3 4 4 1 1 2 2
TIP:
You can change the On-Screen language in “PLAYER MENU”
setting. (Refer to page 14.)
Hint Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
Resume
Hit [STOP C C ]. Resume mes-
sage will appear on the TV
screen.
Hit [PLAY B B ], playback will
resume from the point at which
playback was stopped.
CD CD DVD-V DVD-V
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Resume ON
Hint Hint
• To cancel resume, hit [STOP C C ] one more time during the stop
mode.
• The resume information will be kept even when the power is turned
off.
Zoom
Hit [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x4 or OFF.
Press [K K / L L / s s / B B ] to slide the zoomed picture across the
screen.
To exit zoom function, hit [ZOOM] repeatedly to select OFF.
DVD-V DVD-V
x2 x4
Hint Hint
• For DVDs, fast forward or reverse search speed is different depending on
the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).
• For Audio CDs, approximate speed is 1(x2), 2(x8) and 3(x30).
Lights up
when power
is on.
Insert a disc with
label facing up.
To start
playback To stop
playback
Hint Hint
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press [PAUSE
k k ] or
[REV h h ] repeatedly in the zoom mode.
• It may take several seconds to slide the zoomed picture.
1 1
P.SCAN (Progressive Scan) light
Lights up when the “PROGRESSIVE”
is “ON”. Details are on page 15.
E6150UD_ENSP.qx33 05.4.5 14:24 Page 9