Functions, Hint, Display setting – FUNAI MSD125 User Manual

Page 15: Audio setting, Display menu, Audio menu

Functions

– 15 –

Hint

TV ASPECT:
• Select “4:3 LETTER BOX”,

so that black bars may
appear on the top and bot-
tom of the screen.

• Select “4:3 PAN & SCAN”

for a full height picture with
both sides adjusted.

• Select “16:9 WIDE” if a

wide-screen TV is connect-
ed to this unit.

STILL MODE:
• Select “AUTO” usually.
• If you select AUTO, automati-

cally select the best resolution
setting (FRAME or FIELD)
based on the datacharacteris-
tics of the pictures. (default).

• If you select “FIELD”, the

picture in the still mode will
be stabilized.

• If you select “FRAME”, the

picture in the still mode will
be highly defined.

• An individual picture on TV

screen is called as “frame”,
which consists of two sepa-
rate images called as “field”.
Some pictures may be blurred
at the AUTO setting instill mode
due to their data characteristics.

PROGRESSIVE:
• You can set “PROGRESSIVE”

to “OFF” either in the Display
menu or by pressing and hold-
ing [PLAY B

] on the front of the

unit for more than 5 seconds.

• When “PROGRESSIVE” is “ON”,

video signals from VIDEO OUT
and S-VIDEO OUT jacks will be
distorted or not be output at all.

DISPLAY Setting

You can change the display functions. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 14.

Select the desired item.

DISPLAY menu

To exit the menu

(for TV ASPECT
& STILL MODE)

TV ASPECT:
(Default: 4:3 LETTER BOX)
See Hint to the right.

QUICK

TV ASPECT

4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE

TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE OFF

Select the
desired
setting.

STILL MODE:
(Default: AUTO)
See Hint to the right.

TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE OFF

STILL MODE

AUTO
FIELD
FRAME

Select the
desired
setting.

SETUP

ENTER

SETUP

DISPLAY

TV ASPECT
STILL MODE
PROGRESSIVE

4:3 LETTER BOX
AUTO
OFF

SETUP

AUDIO

DRC
DOWN SAMPLING
DOLBY DIGITAL

ON
ON
BITSTREAM

AUDIO Setting

Choose the appropriate audio settings for your equipments. It only affects during the playback of DVD discs. Follow steps 1)
to 3) in the “CUSTOM Menu” section on page 14.

Select the desired item.

AUDIO menu

To exit the menu

SETUP

DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud sounds.

DOLBY DIGITAL:

(Default: BITSTREAM)

Set to “BITSTREAM” when the unit is connected to a Dolby Digital receiver.
• BITSTREAM: Outputs a Dolby Digital Signals.
• PCM: Convert the Dolby Digital into PCM (2 channel).

QUICK

DRC

DOWN SAMPLING

DOLBY DIGITAL

BITSTREAM

OFF
ON
BITSTREAM

DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48 kHz.
Set to “OFF” when outputting the original sound.

DRC

DOWN SAMPLING

DOLBY DIGITAL

BITSTREAM

ON
ON
PCM

DRC

DOWN SAMPLING

DOLBY DIGITAL

BITSTREAM

ON
OFF
BITSTREAM

Hint

DRC:
• This function is available

only on the discs which
are recorded in the Dolby
Digital format.

DOWN SAMPLING:
• When playing disc with

• This function is available

only on digital outputting
of a disc recorded in
96kHz.

ENTER

To confirm the

PROGRESSIVE
scanning mode

PROGRESSIVE:
(Default: OFF)
See Hint to the right.

QUICK

TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE OFF

4:3 LETTERBOX
AUTO
ON

ENTER

SETUP

Select
YES.

ENTER

NO
YES

Confirm again to use progressive scan.

If Picture is good, Select “YES”.

SELECT: K / L

SET:ENTER

Before proceeding…

1. Make sure your TV has progressive scan.
2. Connect with component video cable

NOTE: If there is no picture or picture is

distorted after selecting “YES”,
wait about 15 seconds for auto recovery.

A c t i va t e P r o gr e s s i ve ?

SELECT: K / L SET:ENTER

NO
YES

Select
YES.

If you do not hit any buttons for 15 seconds,
Progressive Scan will switch to “OFF”.

If “PROGRESSIVE” is “ON”,
this message appears:

ENTER

E6150UD_ENSP.qx33 05.4.5 14:24 Page 15