FRIGIDAIRE FGTC2349KS - Manual (Page 4)

Collar Kit (CK23CDS) Installation
For Panel Kit-Ready, Counter-Depth Refrigerator (FGTC2349KS)
Specifications
subject to change.
Collar Kit (CK23CDS) - Stainless Steel Finish for
Panel Kit-Ready Frigidaire Gallery CD Refrigerator
FRIGIDAIRE®
USA • 250 Bobby Jones Expressway • Martinez, GA 30907 • 1-800-FRIGIDAIRE • frigidaire.com
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca
CK23CDS INST FR 06/09 © 2009 Electrolux Home Products, Inc. Printed in the U.S.A.
• To provide additional clearance for overhead cabinet doors when
in open position, allow 1" from underside of cabinet to bottom
of cabinet door.
• A minimum width of 36-1/8" is required for refrigerator installation
with an additional 1/2" or 3/4" added for each side panel.
• If 1/2" side panels are used, then side trim piece and panel will
be even. If 3/4" side panels are used, then 1/4" of side panel will
extend beyond collar trim and must be finished.
• For detailed refrigerator installation, refer to model-specific
product page and installation guide on web.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Collar Kit (CK23CDS) Installation Specifications
• Collar Kit (PN # CK23CDS) is designed to complete “Built-In Look”
when installed on Panel Kit-Ready Frigidaire® Counter-Depth
Refrigerator model FGTC2349KS.
• To use Collar Kit (PN # CK23CDS), an enclosure is required around
Counter-Depth Refrigerator having an opening of 70-1/4" H x
36-1/8" W with minimum cabinet side panels of 24-1/2" D x 1/2" W.
• Minimum 24-1/2" depth requires recessed electrical outlet and
water line.
• Add maximum of 1/4" to 70-1/4" opening height when installed with
frameless-style overhead cabinets, for door opening clearance.
• Cabinet or soffit above unit must extend out to same depth as
side panels.