Furman Sound PM-8 II - Manual (Page 5)

SERIES II 15 AMP PowER CondItIonERS
The PL-8 II features LED rack lights which
produce virtually no heat and provide an
extremely long life span. A dimmer control
for the rack lights allows the user to adjust
the level of illumination or simply switch the
lights off. Additionally, a rear mounted BNC
jack accepts any standard (12VAC 0.5 amp)
gooseneck lamp for rear rack illumination.
The PL-8 II has a master switch for all outlets
that glows red when the power is on. The front-
panel circuit breaker can be quickly and easily
reset should the unit be overloaded. The PL-8
II also features a 10 foot, 14 gauge heavy-duty
power cable.
PL-PLUS SERIES II
The PL-Plus II features LED rack lights which
produce virtually no heat and provide an
extremely long life span. A dimmer control
for the rack lights allows the user to adjust the
level of illumination or simply switch the lights
off. A rear mounted BNC jack accepts any
standard (12VAC 0.5 amp) gooseneck lamp for
rear rack illumination.
Additionally, the PL-Plus II offers a 20
segment LED bar-graph meter that displays
incoming voltage between 90 and 128 volts
in 2-volt steps. The normal range voltages
are indicated in green, with moderately and
extremely high or low voltages in yellow and
red respectively. The voltmeter’s accuracy is ±2
volts. It can easily be re-calibrated, if necessary.
(E- versions 180 – 256 VAC in 4 volt steps / J-
versions 80 - 118 VAC in 2 volt steps)
The PL-Plus II has a master switch for all
outlets that glows red when the power is on.
The front-panel circuit breaker can be quickly
and easily reset should the unit be overloaded.
The PL-Plus II also features a 10 foot, 14
gauge heavy-duty power cable.
PL-PLUS D SERIES II
The PL-Plus D II features LED rack lights
which produce virtually no heat and provide
an extremely long life span. A dimmer control
for the rack lights allows the user to adjust the
level of illumination or simply switch the lights
off. A rear mounted BNC jack accepts any
standard (12VAC 0.5 amp) gooseneck lamp for
rear rack illumination.
Additionally, the PL-Plus D II offers a laboratory
precision digital meter that displays incoming
voltage in 1-volt steps. The voltmeter’s
accuracy is ±1.5 volt.
The PL-Plus D II has a master switch for all
outlets that glows red when the power is on.
The front-panel circuit breaker can be quickly
and easily reset should the unit be overloaded.
The PL-Plus D II also features a 10 foot, 14
gauge heavy-duty power cable.
PM-8 SERIES II
The PM-8 II features two laboratory precision
digital meters that display both incoming
voltage in 1-volt steps, and a true R.M.S.
current meter that measures the AC power
draw within 0.5 amp. A rear mounted BNC
jack accepts any standard (12VAC 0.5 amp)
gooseneck lamp for rear rack illumination.
The PM-8 II has a master switch for the rear
outlets that glows red when the power is on.
The front-panel circuit breaker can be quickly
and easily reset should the unit be overloaded.
The PM-8 II also features a 10 foot, 14 gauge
4