FUJITSU MHE2064AT User Manual
Page 111
Interface
5-36
C141-E057-01EN
Table 5.4 Information to be read by IDENTIFY DEVICE command (6 of 7)
Bit 2:
ATA-2 supported = 1
Bit 1:
ATA-1 supported = 1
Bit 0:
Undefined
*10 WORD 82
Bit 15:
Undefined
Bit 14:
'1' = Supports the NOP command.
Bit 13:
'1' = Supports the READ BUFFER command.
Bit 12:
'1' = Supports the WRITE BUFFER command.
Bit 11:
Undefined
Bit 10:
'1' = Supports the Host Protected Area feature set.
Bit 9:
'1' = Supports the DEVICE RESET command.
Bit 8:
'1' = Supports the SERVICE interrupt.
Bit 7:
'1' = Supports the release interrupt.
Bit 6:
'1' = Supports the read cache function.
Bit 5:
'1' = Supports the write cache function.
Bit 4:
'1' = Supports the PACKET command feature set.
Bit 3:
'1' = Supports the power management feature set.
Bit 2:
'1' = Supports the Removable Media feature set.
Bit 1:
'1' = Supports the Security Mode feature set.
Bit 0:
'1' = Supports the SMART feature set.
*11 WORD 83
Bits 15-5: Undefined
Bit 4:
'1' = Supports the Removable Media Status Notification feature
set.
Bit 3:
'1' = Supports the Advanced Power Management feature set.
Bit 2:
'1' = Supports the CFA (Compact Flash Association) feature set.
Bit 1:
'1' = Supports the READ/WRITE DMA QUEUED command.
Bit 0:
'1' = Supports the DOWNLOAD MICROCODE command.