Festool RO 125 FEQ - Manual (Page 5)

5
Various dust created by
power sanding, sawing, grinding, drilling
and other construction activities contains
chemicals known (to the State of Califor-
nia) to cause cancer, birth defects or other
reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement
and other masonry products,
• Arsenic and chromium from chemically-
treated lumber.
The risk from these exposures varies, de-
pending on how often you do this type of
work.
To reduce your exposure to
these chemicals work in a
well ventilated area and use
approved safety equipment,
such as dust masks that are
specially designed to fi lter out
microscopic particles.
The sanders are designed for sanding and
polishing wood, plastic, metal, composite
materials, paint/varnish, fi ller and similar
materials.
Do not use with materials containing as-
bestos.
The tools must not be used when wet or
5 BATTERY TOOL USE AND CARE
a) Recharge only with the charger speci-
fi ed by the manufacturer. A charger
that is suitable for one type of battery pack
may create a risk of fi re when used with
another battery pack.
b) Use power tools only with specifi cally
designated battery packs. Use of any
other battery packs may create a risk of
injury and fi re.
c) When battery pack is not in use, keep
it away from other metal objects like
paper clips, coins, keys, nails, screws,
or other small metal objects that can
make a connection from one terminal
to another. Shorting the battery termi-
nals together may cause burns or a fi re.
d) Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally oc-
curs, fl ush with water. If liquid con-
tacts eyes, additionally seek medical
help. Liquid ejected from the battery may
cause irritation or burns.
6 SERVICE
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Intended use
damp, or operated in a damp environment,
for electrical safety reasons. Use this sander
only for dry sanding.
The user bears sole responsi-
bility for any damage or accidents resulting
from incorrect use.
Electrical connection and operation
The mains voltage must correspond to the
voltage on the rating plate!
See the following fi gure for connection and
dis connection of the power cord.
TO REDUCE THE RISK OF
INJURY, USER MUST READ INSTRUCTION
MANUAL.