FUJITSU F2MC FAMILY MB2142-03 - Manual (Page 23)

15
2.3 Connection to Host Machine
2.3 Connection to Host Machine
As shown in Figure 2.3-1 "Printer Cable Connection", use the printer cable (sold
separately) to connect the parallel communications adapter to the host machine.
■ Connection to Host Machine
As shown in Figure 2.3-1 "Printer Cable Connection", use the printer cable (sold separately) to
connect the parallel communications adapter to the host machine.
For details of how to connect the printer cable (sold separately) to the host machine, refer to the
manual for the host machine.
■ Notes
When connecting the parallel communications adapter to the host machine, keep the following
notes in mind:
• Turn off the power before connecting or removing a cable. Attempting to connect or remove
a cable while the power is turned on may cause a malfunction.
• To remove a cable, do not pull the cable itself; grasp and pull the connector. Pulling the
cable itself may cause a conductor inside the cable to break.