beautypg.com

Festool LEX 2 150/3 User Manual

Page 5

background image

5

Maintenance and care

Always disconnect the tool from

the compressed air supply before doing any

work on the tool.

Any maintenance or repair work requiring the

motor housing to be opened may only be carried

out by an authorized service workshop.

Vanes

We recommend that the vanes on the motor

be replaced after approx. 500 operating hours.

Sanding pad brake

The collar (5.1) makes contact with the sanding

pad, thus preventing uncontrolled vibration of

the sanding pad. This collar wears out over time

and must be replaced should brake fading occur.

The sanding pad must be removed for this. You

can then remove the collar from the snap-on

fastener (5.2) and replace it with a new one.

Lubrication

If the tool has not been used for an extended

period, such as a weekend, introduce 1 or 2

drops of lubricating oil into the compressed-air

supply (5.3) on the tool prior to use.

Replacing the silencer

The silencer on the IAS 2 connecting piece must

be replaced at regular intervals to maintain the

power of the pneumatic tool.

Cleaning the extraction channels

We recommend that the extraction channels in

the tool (5.4) be cleaned once a week using a

small pipe-cleaner brush or a cloth (especially

when sanding resin filler).

Accessories, tools

For safety reasons, only use

original Festool accessories and tools!

Accessory and tool order numbers can be found

in your Festool catalog.

Warranty

Conditions of 1+2 Warranty

You are entitled to a free extended warranty (1

year + 2 years = 3 years) for your Festool power

tool. Festool shall be responsible for all shipping

costs during the first year of the warranty. During

the second and third year of the warranty the

customer is responsible for shipping the tool to

Festool. Festool will pay for return shipping to

the customer using UPS Ground Service. All

warranty service is valid 3 years from the date

of purchase on your receipt or invoice.

Festool Limited Warranty

This warranty is valid on the pre-condition that

the tool is used and operated in compliance with

these Festool operating instructions. Festool

warrants, only to the original consumer

purchaser, that the specified tool will be free from

defects in materials and workmanship for a term

of one year from the date of procurement. Festool

makes no other warranty, express or implied,

for Festool portable power tools. No agent,

representative, distributor, dealer or employee

of Festool has the authority to increase or

otherwise change the obligations or limitations

of this warranty. The obligations of Festool in its

sole discretion under this warranty shall be

limited to the repair or replacement of any Festool

portable power tool that is found to be defective

as packaged with this User Manual.

Excluded from coverage under this warranty are:

normal wear and tear; damages caused by

misuse, abuse or neglect; damage caused by

anything other than defects in material and

workmanship. This warranty does not apply to

This manual is related to the following products: