FieldServer Gardner Denver FS-8700-60 - Manual (Page 5)

FS-8700-60 Gardner Denver Manual Page 5 of 12
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
3 HARDWARE CONNECTIONS
The FieldServer is connected to the ES/RS2000 Controller as shown in the connection drawing below:
Configure the ES/RS2000 Controller according to manufacturer’s instructions.
3.1 Hardware Connection Tips / Hints

If inter-controller communications are set up for the controller, connect to the RS-232 port only.

If inter-controller communications are not used, connect to either the RS-232 or RS-485 port of the
Controller.