FujiFilm BL00969-200 - Manual (Page 30)

22
SET-UP
Setup Menu Options Setup Menu Options
Menu item Menu item Description Description Default Default
VOLUME Adjust volume. 7 / i
SLIDESHOW TIME/FRAME Choose how long each slide is displayed during a slide show. 3 SEC
DATE/TIME Set the clock (pg. 10). —
3D CAUTION DISP
Disable C to prevent fatigue or display a warning after
prolonged use. Choose 30 MIN to display a warning after
30 minutes of continuous
C display (measured from when
this option is selected or the start of C display), NOT 3D
to disable C, or OFF to enable C with no warning after
prolonged use.
30 MIN
3D LEVEL Choose the amount of 3D eff ect in the setup menu. LEVEL2
ILLUMINATION Choose whether the viewer controls are illuminated. OPERATING ONLY
a Choose a language (pg. 10). ENGLISH
LCD BRIGHTNESS Adjust display brightness. 0
CONTRAST Adjust contrast. 0
SATURATION Adjust the saturation (vividness) of colors. 2
COLOR Adjust hue. 0
GAMMA Adjust display gamma. 0
DISP. SETTING
Choose the aspect ratio at which photos with a 16 : 9 as-
pect ratio are displayed when FULL SCREEN is selected for
A DISP. SETTING (if IMAGE SIZE is selected for A DISP.
SETTING, photos with a 16 : 9 aspect ratio will be displayed
in letter-box format). Choose FULL IMAGE to fi t the image
to the screen, FILL SCREEN to magnify the image so that the
center fi lls the screen and the right and left sides are cropped
out.
FULL IMAGE
IR COMMUNICATION
Choose the action performed when an image is received via
infrared.
DISP
FIRM. VERSION Display the current fi rmware version. —
SET CLOCK/CALENDAR
POSITION Choose the position of the clock and calendar in the display
(pg. 10). CLK: UPPER LEFT
CAL: UPPER RIGHT
ORIENTATION Rotate “tall” images. STD
AUTO ROTATE PB
Use the image orientation information in image fi les to auto-
matically display pictures in the correct orientation.
ON
A DISP. SETTING Automatically enlarge images to fi ll the viewer. IMAGE SIZE
SORTING TYPE Choose the order in which images are listed.
DATE CREATED,
ASCENDING
RESET Reset all settings except DATE/TIME to default values. —