FujiFilm BL00969-200 - Manual (Page 14)

6
Readying the Remote Control
Replacing the Battery Replacing the Battery
If the remote control does not function as expected, replace the battery with a fresh
CR2025 battery (available separately from third-party suppliers).
1 Turn the remote control over and remove the battery holder.
Remove battery
holder, keeping latch
pressed to right
2 Remove the old battery from the holder and insert a fresh battery as shown, with the
“+” indicator uppermost.
3 Caution
Insert the battery in the correct orientation.
3 Slide the holder into the remote control until the latch clicks into place.