2 overview – FUJITSU FMC-16FX FAMILY User Manual

Page 5

ADA-16FX-ETHERNET

Chapter 2 Overview

- 5 -

UG-960011-10

2 Overview

2.1 Abstract

The ADA-16FX-ETHERNET is an adapter board that can be used together with the
evaluation board SK-16FX-EUROSCOPE (SK-16FX-100PMC). The ADA-16FX-ETHERNET
extends the evaluation board with Ethernet connectivity. It can be used for software
development and testing.

The board allows the designer immediately to start with the software development before a
final target system is available.

2.2 Features of adapter board

ADA-16FX-ETHERNET

10BaseT Ethernet connectivity

Software example including openTCP stack is available

Multiplexed bus interface

Selectable chip select via Jumper

Pin header for SK-16FX-EUROSCOPE (SK-16FX-100PMC) base board

(Note: SK-16FX-EUROSCOPE has to be ordered separately)

2.3 Features of base board SK-16FX-EUROSCOPE (SK-16FX-100PMC)

1x UART-Transceiver (SUB-D9 connector)

1x USB to serial converter (Type-B connector)

1x High-speed CAN-Transceiver (SUB-D9 connector)

2x LED-Display (7-Segment)

2x User-button

1x Reset-button, Reset-LED

All 100 pins routed to pin-header

On-board 5V and 3V voltage regulators, Power-LED

USB power-supply (external power supply possible)

This board must only be used for test applications

in an evaluation laboratory environment.