FujiFilm FinePix 40i - Manual (Page 45)

88 89
6
89
2 1
➀
Set the Mode dial to “
0
”.
➁
If you press the “MENU/OK” button, the menu
screen will appear on the LCD monitor.
➂
Use “ d ” or “ c ” to select “MODE” and then
use “ a ( )” or “ b ( )” to select “SET-UP”.
➃
Press the “MENU/OK” button.
➀
Use “ a ( )” or “ b ( )” to select the item.
➁
Then use “ d ” or “ c ” to change the setting.
● ➀ ● ➁ ● ➀ ● ➁ ● ➃
88
SET-UP MODE
e The table below explains the camera setting
6
Setting
SET [OK] END Confirms the settings and exits setup.
YES/NO YES
AUTO POWER
OFF
Use this setting to specify whether the camera
automatically switches off if it is left unused for 2
minutes. Note that the Auto Power Off function does
not operate during Auto Play or when a USB
connection is being used.
HIGH/LOW/OFF HIGH BEEP
Selects the volume of the beep sound emitted when
camera controls are used.
SET [OK] DATE/TIME
Allows you to set the date and time. See P.19 for
details.
RENEW/CONT RENEW FRAME NO.
Selects whether the frame number memory function is
used. See P.90 for details.
Item Display Factory Default Details
●
! Press the “MENU/OK” button to select “Set Date/
Time”. See P.19 for details.
● ➂