FieldServer FS-8700-52 - Manual (Page 11)

FS-8700-52 Notifier AM6000 Driver Manual
FieldServer Technologies 1991 Tarob Court, Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042
Visit our website: www.fieldserver.com E-mail: [email protected]
Page 9
Map_block_Name,scan_interval, Data_Array_Name, Data_Array_Offset, Function, node_name, AM6000_TypeID, Length , am6000_Ackabl
MD1, 1.0s, SYSTEM_TROUBLES2, 5, passive, node_a, system-styl2, 50 , Yes
Name of the data
array that will be
updated when this
map descriptor is
used.
All map
descriptors for the
AM6000 Notifier
driver must be
passive.
When a Block
Acknowledge or System
Reset message is
received the driver will
set the portion of the
data array
DEVICE_STATES_LO
OP1 starting at
Data_Array_Offset for
Length number of
elements to zero.
System Trouble Messages are
processed using this map
descriptor. Only one map
descriptor like this is necessary for
a whole system.
This indicates Style2 is being used.
Thus when system trouble message
number n is processed the nth
element of data array starting at
location 5 (this example) will be
set to 1.