FieldServer FS-8700-124 - Manual (Page 7)

ProtoNode Driver Manual (FS-8700-124) rev 6.doc Manual
Page 7 of 17
ProtoCessor 1991 Tarob Court Milpitas, California 95035 USA Web:www.protocessor.com
Tel: 408.964.4433 Fax: 408.964.4425 Toll_Free: 800.317.8319 email: [email protected]
4.2. Client Side Connection Descriptions
Section Title
Connections
Column Title Function Legal Values
Port
Specify which port the device
is connected to the ProtoNode
P1-P8
Protocol Specify protocol used TOSHIBA_UPS, TOSH_UPS
Baud* Specify baud rate
1200–9600, standard baud rates
only (Vendor limitation)
Parity* Specify parity Even
Data_Bits* Specify data bits 7
Stop_Bits* Specify stop bits 1
Handshaking* Specify hardware handshaking None
Poll _Delay* Time between internal polls 0-32000 seconds, 0.05 seconds
Example
// Client Side Connections
Connections
Port,
Protocol, Baud, Parity, Handshaking, Data_Bits Poll_Delay
P1, TOSH_UPS, 1200, Even, None, 7 0.100s
4.3. Client Side Node Descriptors
Section Title
Nodes
Column Title Function Legal Values
Node_Name Provide name for node Up to 32 alphanumeric characters
Node_ID
Modbus station address of
physical server node
1
Protocol Specify protocol used TOSH_UPS, TOSHIBA_UPS
Node_Type The model of the TIC UPS
1600, 1800, 4200, G8000,
G8000MM, G9000
Connection
Specify which port the device is
connected to the ProtoNode
P1-P8 1
1
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for
details of the ports available on specific hardware.