Flymo Mini Trim Auto - Manual (Page 11)

10
Fault Finding Hints & Service Recommendations
MAINTENANCE
1. We strongly recommend that your
product is serviced at least every
twelve months, more often in a
professional application.
2. Always use genuine Flymo Spare
Parts.
3. Prepacked spares are available from
most Electrolux Outdoor Products
stockists.
4. If you have a problem with your
machine contact your local
Approved Service Centre ensuring
you have full details of your product
as described on the product rating
label.
5. Should it be necessary for work
to be carried out by your Service
Centre, it is important to take
your complete machine with you.
6. In the event of further difficulty
please contact:-
Electrolux Outdoor Products
Customer Service
Preston Road
Aycliffe Industrial Estate
NEWTON AYCLIFFE
Co. Durham
DL5 6UP
Telephone: (01325)
300303
Fax : (01325) 318193
A network of specialist dealers can be
found in your local Yellow Pages.
To obtain service on your Flymo
product simply telephone or visit your
local Service Centre.
Should you require service under the
terms of our guarantee the Service
Centre will require proof of purchase.
All of the centres stock genuine
Flymo Spare Parts.
NOTE:
Our Service Repairers act on their
own behalf and are not empowered
to commit or legally bind Electrolux
Outdoor Products in any manner
whatsoever.
Fault Finding Hints
1. Line too short
Manually feed out the line.
2. Line broken inside cutting head.
Remove cap and re-thread line.
3. Line jammed on spool
Remove cap and spool and rewind line to
remove crossed loops.
4. Poor performance
Ensure inside of cutting head housing is
clean and free from debris.
5. Trimmer stops during use.
Release switch lever and wait 30 seconds
before re-starting.
Service Recommendations