Flymo Mini Trim Auto - Manual (Page 10)

9
MAINTENANCE
M
N
P
Q
Caring for your Mini-Trim Auto
• WARNING
Disconnect from the mains
electricity supply, before
attempting any maintenance or
adjustment. Cutting head
continues to rotate after the
trimmer has been switched off.
Keep fingers and hands clear of
the line cutter on leading edge of
guard.
After you have finished using your
Flymo Trimmer follow the procedure
below:
1. Disconnect from the mains
electricity supply
2. Never clean your trimmer with
water, cleaning fluids, or solvents,
just remove debris with a suitable
tool, a soft brush or dry cloth.
3. Using the scraper provided, clean
around the inside of the cutting
head housing to remove any grass
and debris. (Fig M)
4. Using a soft brush, clean around the
inside of the cutting head housing
(Fig N), the cutting head (Fig P)
and the motor housing air vents.(Fig
Q)
5. Inspect the trimmer carefully,
especially the parts of the cutting
head.
6. If your trimmer is damaged in any
way contact your local Electrolux
Outdoor Products approved service
centre.
• Never use a damaged trimmer.
7. Wind cable carefully to avoid
kinking.
8. Store in a cool, dry place and out of
reach of children.