Fluke 54IIB - Manual (Page 21)

53IIB/54IIB
Using Memory
17
Clearing Memory
When memory is full,  appears on the display and
logging stops. You can clear memory in normal or MIN
MAX mode.
• Press  ,  (CLEAR MEMORY) to delete logged
readings from memory.
The display shows the following for 2 seconds.
MEMORY
 
Viewing Logged Readings
1. Press  to view logged readings.
The display shows .
2. Press  or  to scroll through the logged readings.
The display shows each logged reading, its time
stamp, and its memory location. For example,
Figure 3 shows the logged reading stored at 2:02 PM
in memory location 18.
aat03f.eps
Figure 3. Logged Reading