FUNAI CR320IL8 - Manual (Page 36)

36
EN
ATSC
Acronym that stands for Advanced
Television Systems Committee
and the name of the digital broad-
casting standards.
High Definition TV (HDTV)
Ultimate digital format that pro-
duces high resolution and high
picture quality.
Letterbox
Letterbox refers to the format dis-
playing a wide-screen picture on a
standard 4:3 aspect ratio televi-
sion screen with black bars above
and below. It is used to maintain
the aspect ratio of the original
source such as a motion picture
(16:9 or wider).
NTSC
Acronym that stands for National
Television Systems Committee
and the name of the current ana-
log broadcasting standards.
SAP
(Secondary Audio Program)
Second-audio channel delivered
separately from main-audio chan-
nel. This audio channel is used as
an alternate in bilingual broad-
casting.
Standard Definition TV (SDTV)
Standard digital format that is sim-
ilar to the NTSC picture quality.
S-Video output
It delivers independently each sig-
nal of color(C) and luminance (Y)
to TV as video signals, so that
higher-quality picture will be
gained.
CABINET CLEANING
• Wipe the front panel and other exterior surfaces of
the TV with a soft cloth immersed in lukewarm
water and wrung dry.
• Never use a solvent or alcohol. Do not spray insec-
ticide liquid near the TV. Such chemicals may
cause damage and discoloration to the exposed
surfaces.
PICTURE TUBE CLEANING
Wipe the picture tube of the TV with a soft cloth.
Before cleaning the picture tube, disconnect the
power cord.
SERVICING
Should your unit become inoperative, do not try to
correct the problem by yourself. There are no
userserviceable parts inside. Turn off, unplug the
power cord and please call our help line mentioned
on the front page, to locate an Authorized Service
Center.
DEGAUSSING
A degaussing circuit in this unit clears up color
errors on the TV screen. Color errors occur when
there is any excess magnetism close to the unit.
This circuit is designed to operate once when the
unit is first plugged in.
If you see minor color errors on the screen,
unplug the unit for approximately 30 minutes.
When you plug in the unit again, the degaussing cir-
cuit will operate to clear errors. Take this step any
time the TV screen is accidentally magnetized or
when you move the unit.
IR SIGNAL CHECK
If the remote control doesn’t work properly, you can
test if the remote control sends out the infrared sig-
nal with AM radio or a digital camera (including built-
in camera of cellular phone). It will help to define the
cause of malfunction.
• With an AM radio:
Tune an AM radio to a station
with no broadcasting. Press a
button on remote control toward
the radio. Sound will be fluttering
when you press any key and the
radio receives the signal. This
means the remote control unit is
working.
• With a digital camera (including
built-in camera of cellular phone):
Direct a digital camera to remote con-
trol, press and hold a button on
remote control. If infrared light
appears through digital camera, the
remote control is working.
MAINTENANCE
GLOSSARY