FELLOWES 520 User Manual

Page 6

520
520C

Paper shredder

Edition 01/03

7. Operation

Read operating instructions before putting
shredder into operation

Insert plug in power outlet

Install waste bag for shredded material

– Open front door and completely remove

bag frame from cabinet

– Fold new bag around frame.

Allow bag to overhang frame by
appoximately 7" (20 cm).

– Slide frame with bag back into cabinet
– Close cabinet door.

Switching equipment on

–

Set main power switch (located on back
of shredder) to ON (1) position.

–

(On the 520 HS, the security key lock
switch must also be turned on)

Green LED lights

• Equipment is ready for operation

(standby)

To shred paper

– Press green arrow button at least 4 sec

• Cutting system runs in forward direction

– Insert paper into the paper feed opening

• Shredding occurs

or
– Feed paper
• The shredding process is started by a pho-

to–cell in the paper feeding opening

When the paper feeding opening is free again, the
cutting system automatically switches off after approx.
3 sec. and returns to standby.

When shredding is completed

– Push stop button

• Cutting system stops
• Equipment returns to "ready-to-operate"

(standby) condition

Switching equipment off

– Set main power switch (located on back

of shredder) to OFF (0) position.

4. Supplies

–

Bags for cut material
(Packed in dispenser carton, 50 or 100 bags to
a roll depending on size. Contact Fellowes or
your local Fellowes dealer for the stock number
of the bag that fits your machine.)

–

Cutting block oil for cross-cut units
Stock # 35250

5. Installation

–

Refer to separate set–up instructions for proper
assembly

–

Operate this product only from the type of
power source indicated on the marking label

–

Install the paper shredder so that the plug is
easily accessible

–

Shredder must be operated only in upright
position

–

Set up paper shredder so that the ventilation
slots are unobstructed. To ensure sufficient
ventilation of the shredder a minimum distance
of 4" (10 cm) to the wall or to the furniture must
be maintained.

6. Caution

Never insert hand, fingers or any
foreign objects into the feed
opening.
Serious injury may result.

Keep all loose articles of
clothing, ties, jewelery, long hair
or other loose objects away from
feed opening.
Injury may result.

Always turn off and unplug the
machine before moving,
servicing, cleaning or any other
conduct other than normal
operation.
Serious injury may result.