Furman Sound 16 E - Manual (Page 12)

IT-REFERENCE 16 E owNER’s maNual
Furman Sound, LLC.
1690 Corporate Circle
Petaluma, California 94954-6919 USA
Phone: 707-763-1010 Fax: 707-763-1310
Web: www.furmansound.com
E-mail: [email protected]
020606
IT-REFERENCE 16 E sPECIFICaTIoNs:
AC Current Capacity:
Input - 16 Amp capacity required*
Output - 8 - 16 Amp RMS * (maximum, all outlets combined - continuous)
* Due to the Power Factor Correction circuit, available RMS power varies with the reactance of the load
(vector). However, this only affects the circuit breaker for continuous RMS current draw. Since power
amplifiers will require high transient current demands, the IT-Reference 16 E will never succumb to current
compression. Quite the opposite, in fact, it will buffer the power amplifier’s power supply, while lowering
the AC input impedance, allowing power amplifiers to work more efficiently.
Linear Noise Attenuation:
Transverse (Differential) Mode:
>15 dB from 1Khz. - 3 kHz. >40 dB from 3 Khz. – 100 kHz. > 80 dB from 100 kHz. - 1GHz
(Linear attenuation curve from 0.05 – 100 ohms line impedance)
Common Mode:
>90 dB, 10 Hz - 50kHz. > 40 dB 50 kHz. - 1MHz.
Transient Voltage Surge Suppression:
266 VAC - Series Multi-Stage Protection Plus - Non-Sacrificial with Zero Ground Contamination.
(376V peak clamping @ 6000V 3000A input)
Extreme Voltage Shutdown (>275 VAC)
Cable / Satellite (less than .1dB insertion loss)
Power Consumption:
2 Watts for display and control circuits independent of actual load.
Outlets:
8 (symmetrical balanced outlets)
4 (power factor corrected outlets – 9 amps RMS reserve – resistive load – over 80 amps peak charge)
Transient Voltage Surge Suppression:
230VAC Line – Series Multi-Stage Protection Plus - Non-Sacrificial with Zero Ground Contamination
Extreme Voltage Shutdown:
275V (+/- 5V)
Cable / Satellite Transient Voltage Surge Suppresion (less than .1dB insertion loss @ 1 GHz)
Dimensions:
152mm H x 432mm W x 413mm D (standard 3RU without feet)
Weight:
37 kg.
Power Consumption:
2 watts for display and control circuits independent of actual load.
Safety Agency Listing:
CE